Home > Products
S13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power Transformer
S13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power TransformerS13-MRL Series Three-dimensional Wound Core Power Transformer

S13-MRL Series Three-dimensional Wound Core Power Transformer

Brand Name: TSTY

Model Number: S13-MRL

Phase: Three

Service Voltage: 6-11kV

Rated Capacity: 80-5000kVA

Product Description

The three-dimensional wound core transformer is an energy-saving power transformer, which is a three-dimensionally arranged iron core composed of three winding cores with the same geometric size and a single frame, it is with three-dimensional wound core as magnetic circuit. The three-dimensional wound core transformer creatively reforms the laminated magnetic circuit structure and three-phase layout of the traditional power transformer to optimize the performance of the product. Such as the three-phase magnetic circuit is completely symmetrical, the power saving effect is significant, the noise is greatly reduced, the heat dissipation and overload capacity are stronger, the structure is compact and the volume is small, etc

Product standard:  IEC60076 & GB1094 and GB/T6451

 

Environmental conditions of S13-M Type Distribution Transformer

Type:Outdoor

Normal Service Conditions:

1 The height above the sea level is below 4000m;

2. Ambient temperature: Highest air temperature+40 ℃, Lowest air temperature-25℃

3. Relative air humidity:≤80%(+25℃)

4. installation site: no corrosion gas, No obvious dirt

For Agricultural power distribution and lighting

Performance parameters

 
 Three-dimensional Wound Core Power Transformer

Product Features

1.Low loss 

The S13-M.RL series of capacity 30-1600kVA no-load loss decreases by 50% on average, and the load loss decreases by 30% on average. S11-M. RL series no-load loss decreased by 30% on average, load loss decreased by 25% on average.

2.Low no-load current

 Due to the excellent material of the wound core and the characteristics of the winding process, the no-load current is significantly reduced. S13-M.RL series no-load current decreases by an average of 75% according to the current national GB/T6451-1999. S11-M.RL series no-load current decreases by an average of 75%.

3.Low operating noise

The noise of S13-M.RL and S11-M.RL series is reduced by about 7-9dB according to JB/T10088-1999 noise standard

4.Strong short circuit resistance

The whole transformer body is in the shape of a body with a triangular prism shape, pull-screws and center are arranged around. It is integrated with upper and lower iron yoke insulation and laminated wood blocks, which can effectively resist the axial and radial mechanical stress during sudden short circuit.

Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

8615890606007